Deze vertaling geeft mogelijk niet de meest recente updates van de bronhandleiding weer. Help ons met het updaten van de vertaling of bekijk de bronhandleiding.
Inleiding
Als het scherm van je iPhone 12 mini gebarsten is, niet langer reageert op aanraking of geen teken van leven geeft als je telefoon aanstaat, kun je deze handleiding gebruiken om je iPhone weer nieuw leven in te blazen met behulp van een nieuw scherm, a.k.a. een nieuwe schermmodule.
De gecombineerde oorstukspeaker + sensormodule die aan de achterkant van het scherm is vastgemaakt is vanuit de fabriek op unieke wijze gekoppeld aan je individuele iPhone en dus zul je deze van je oude naar je nieuwe scherm moeten verplaatsen bij het vervangen van je scherm. Dit onderdeel bevat onder andere de infraroodschijnwerper, welke onderdeel is van de biometrische Face-ID beveiligingsfeature. Als deze vervangen wordt of beschadigd is, zullen de Face-ID functies niet langer werken. Zorg dus dat je extra voorzichtig te werk gaat en geen van deze onderdelen tijdens deze procedure beschadigt. Als het onderdeel wel beschadigd raakt, kan alleen Apple of een door Apple geautoriseerde reparateur de Face-ID functies herstellen.
Let op: de True Tone-functie is uitgeschakeld na het vervangen van het scherm, zelfs als je gebruik maakt van een origineel Apple-scherm. Daarbij kan het voorkomen dat je iPhone een tijdelijke waarschuwing weergeeft over de echtheid van het scherm.
Wat je nodig hebt
-
-
Schakel je iPhone uit voordat je begint met het demonteren van je toestel.
-
Verwijder de twee 6.7 mm lange pentalobe-schroeven aan de onderkant van je iPhone.
-
-
-
Plaats op 3 mm van de punt van je plectrum een markering met een stift.
Got to step 2 and realized the fix kit doesn't include an opening pick! Looks like a guitar pick, and I have those lying around. Is that expected? Looks like the pick is used in many steps below. There's a little blue crowbar that isn't mentioned in the instructions. Perhaps that replaces the opening pick?
Hi! I can't see which guide you were using when writing this comment. Can you reply here with which guide and fix kit you used?
I see you posted this in Meta. I hope it's resolved soon! In the meantime, a guitar pick may work well enough for your repair.
what fix kit?
My fix kit didn't include an opening pick either
My AliExpress refurbished screen came with a pick that has a coin-like circle that pops out, so no modification was necessary
That is a misunderstanding. It is a ruler with a scale for cm, it shows 0.3 cm, i.e. 3 mm.
VauWeh -
Oh, come ON!
Big Ed -
It will ALWAYS be millimeters on a phone, but this step is ridiculous, skip it!
@leifdewolf I wouldn't skip it for a first repair.
It's not an Ifixit KIT if it doesn't include everything. You'll need to order the opening pic separately. Or head to Walmart like myself and look for guitar pics. Hopefully, this will work just as well.
No pick in mine as well. It’s really not clear that you have to order this separately when ordering an IPhone SE 202/2022 screen repair kit. Is this the case?
Frustrated, I ordered a compact package where everything was encapsulated. Useless suction tools could not separate the screen. If it is unable to decouple the screen, then why sucking suction tools you have provided.
For my kit the triangle pick was stuck inside the box with the screen not with the other tools maybe it's also there for you
Y’all are getting far, FAR too detailed with some of this stuff…. Measuring and marking the pick that you won’t actually use to open the device?!? lol that’s kinda funny. Just heat it up, grab a spudger, and the back just pops right off! The iFixit tech need to stick to the KISS method more often, you know KEEP IT SIMPLE STUPID!!! Like l, for reals, I’ve been doing this stuff for YEARS and using iFixit guides regularly and this is just ridiculous at this point!
Will the phone still work if the sensor assembly on the back of the screen is damaged?
The pick in my iFixIt kit was packed with the battery, not with the rest of the toolkit.
-
-
-
Plak een aantal lagen tape op het scherm van de iPhone tot het gehele scherm bedekt is.
-
Als het je in de volgende stappen niet lukt om de zuignap op het scherm te bevestigen, kun je ervoor kiezen om een stuk duct tape in een handvatvorm op het scherm te plakken. Hiermee kun je dan het scherm omhoog tillen om een opening te creëren.
-
-
Gereedschap gebruikt in deze stap:Clampy - Anti-Clamp€24.95
-
Trek het blauwe handvat naar achteren om de armen van de anti-klem te ontgrendelen.
-
Schuif de armen over de linker- of rechterzijde van je iPhone.
-
Plaats de zuignappen aan de onderkant van de glazen achterkant—één aan de voorkant en één aan de achterkant.
-
Druk de zuignappen aan zodat je zeker weet dat ze zich goed vastzuigen.
-
-
-
Trek het blauwe handvat naar voren om de armen van de anti-klem te vergrendelen.
-
Draai het handvat 360 graden met de klok mee of tot de zuignappen uit beginnen te rekken.
-
Zorg dat de zuignappen op één lijn met elkaar zitten voordat je begint met het openen van het toestel. Als je ziet dat de zuignappen niet meer op één lijn zitten, maak je ze los en breng je ze weer op de juiste positie aan.
-
-
-
Zorg dat je iPhone op een stevig object rust (zoals een boek met harde kaft) zodat de telefoon parallel aan je werkoppervlak blijft liggen en je er met twee handen aan kunt werken. Dit maakt het uitvoeren van de volgende stappen gemakkelijker.
-
Gebruik een föhn om de onderkant van de iPhone te verwarmen en de lijm die het scherm vasthoudt te verzwakken. Het glas zou iets te warm moeten zijn om comfortabel aan te raken.
-
Geef de lijm ongeveer een minuutje de tijd om los te komen en trek het toestel vervolgens rustig uit elkaar tot je een opening hebt gecreëerd.
-
Steek een openingsplectrum in de opening onder de rand van het scherm.
-
Sla de volgende drie stappen over.
-
-
-
Gebruik een föhn of een heteluchtpistool en leg deze gedurende 90 seconden op de onderkant van de telefoon om de lijm eronder te verzwakken.
you need to clarify that you're heating the metal frame, not the glass. I gently heated the glass front with a heat gun and proceeded to pull the display apart, destroying it. :-(
-
-
-
Als je een enkele zuignap gebruikt, druk je deze, zo dicht mogelijk bij de onderkant van je iPhone, op het scherm.
-
Als je scherm gebarsten is, kun je het beplakken met doorzichtige tape, zodat je zuignap zich beter vast kan zuigen. Als alternatief kun je sterke tape gebruiken ''in plaats van'' de zuignap. Als dat alles niet lukt, kun je je zuignap vastlijmen met secondelijm.
I would recommend starting with a bottom corner, not the bottom middle. If the adhesive isn't softened enough, you will pull the middle out but the sides will still be stuck on, causing extreme flex to the panel and damage to the panel down the middle (white bars down the middle in a worst case). I did this to my phone.
-
-
-
Trek de zuignap met een stevige, constante kracht omhoog om zo een kleine opening tussen het voorste paneel en de achterste behuizing te creëren.
-
Steek een openingsplectrum in de opening onder de plastic rand van het scherm.
I ended up separating my screen rather than getting under the scren casing.. BE CAREFUL TO MAKE SURE YOU ARE UNDER THE PLASTIC PART - otherwise you just ruin your screen... No mention of this precaution here and as a result, my phone is more broken than when I started
Hi, I don’t get it. Should the plastic part stay with the display or with the phone?
The plastic frame should stay with the display.
Broke the screen. Too bad. I've done maybe 5 battery replacements before. But this one is very very tight. Got a new phone. :P
Same thing, I broke my screen too. I think the warning should be in all caps and show more clearly where is the right place to put the pick and where is not — without the need to click on the link.
Judging by amount of people who reported it here (and should also account for those who didn't bother to report), I'd say that there is a problem with instructions.
It is honestly not so hard if you know what does mistake looks like and that it is possible to separate the screen so easily from the frame. I repaired more than a dozen phones — screens and batteries — and this is the first time I made such a mistake that costs 100+euros.
something, broke my screen by inserting the pick in between. also wish the hair dryer has pointed to the side rather than the display. damaged my display after replacing battery, so my phone is more broken than when I started
-
-
-
Gebruik een föhn om de rechterzijde van de iPhone gedurende 90 seconden te verwarmen. Het scherm moet net iets te warm zijn om comfortabel aan te kunnen raken.
The pictures show the left side. I know that the left side is the correct one to heat, but for others it might be confusing. 😊
@dviosz You mean the right edge! The picture shows the left edge but the right edge is the correct one to heat. As described in the text next to it. Opening the phone from the left will damage it!
Yeah, sorry, you are right! (tried to make something less confusing and created more confusion by accident… 😃 )
THIS ONE HERE (lolz)
weebeast -
-
-
-
Schuif je openingsplectrum langs de rechter onderhoek van het scherm en langs de rechterzijde omhoog en snijd onderweg alle lijm door die je tegenkomt.
Be very careful your tool does NOT go in between the screen and the screen frame but rather in between the screen frame and the phone frame. If not you will damage the screen and need a new one. This has happened to MANY people. The screen is attached to the screen frame with an adhesive that can also be accidentally pried apart if not done carefully. This is probably more likely if your tool is too thin, if you dont heat enough, or dont suction and pull enough to create a big enough separation between the screen frame and the phone frame.
Yes, this happens to me, too. It took a long time until I could remove the screen using a heat gun with a heat gun set to 120°C (after trying first with 90° and 100°). Now the right side of the display shows white stripes and the touch doesn't react. -> New display necessary...
same as @bernd lohr.
-
-
-
-
Gebruik een föhn om de bovenkant van de iPhone gedurende 90 seconden te verwarmen. Het scherm zou net iets te warm moeten zijn om comfortabel aan te kunnen raken.
-
-
-
Steek je plectrum onder de rechter bovenhoek van het schermpaneel.
-
Schuif je plectrum om de rechter bovenhoek heen. Het kan zijn dat je wat weerstand voelt vanwege de klemmen die het scherm vasthouden.
-
Schuif je plectrum langs de bovenkant van de telefoon en snijd alle lijm door die je onderweg tegenkomt.
-
-
-
Gebruik een föhn om de bovenkant van de iPhone gedurende 90 seconden te verwarmen. Het scherm zou net iets te warm moeten zijn om comfortabel aan te kunnen raken.
-
-
Welches Ersatzteil benötige ich, wenn die obere Verbindung gerissen ist?
I accidentally tore the cables off. What can I do?
The display flexy is in the middle of the left side, please update the picture showing the flexy connected and highlight in red, so other users don't damage it as I did :(
Updated -- thank you! Does this look better?
-
-
Steek een tweede openingsplectrum in de linker benedenhoek van de iPhone.
-
Draai beide plectrums tegelijkertijd naar de zijkant om het scherm los te maken uit de klemmen aan de linkerzijde van de telefoon.
Don't go from just one corner (like on the right side). I've done that (forgot this step) and broke my screen.
-
-
-
Draai de iPhone zodat de rechterzijde naar je toe wijst.
-
Open de iPhone door het scherm van de rechterkant omhoog te zwaaien, zoals je zou doen met een boek.
-
Laat het scherm tegen iets rechtopstaands leunen om deze omhoog te laten staan terwijl je verder werkt aan de telefoon.
-
-
-
Verwijder de 1.25 mm lange Y000-schroef die de cover over de batterij- en de schermaansluiting bevestigt.
hallo, ich sehe in Schritt 17 nur EINE markierte Schraube... (?)
This Shield is garbage and once it's taken out it's next to impossible to get back in. I'm not even going to put the shield back in I'm just going to put kapton tape over it and call it good.
-
-
Gereedschap gebruikt in deze stap:Precision Tweezers€4.95
-
Gebruik een pincet om het plaatje over de scherm- en batterijaansluiting te verwijderen.
-
-
-
Gebruik een spudger of een schone nagel om de batterijaansluiting uit het contact op het logic board omhoog te duwen.
-
Buig de aansluiting lichtjes van het logic board weg om te voorkomen dat deze per ongeluk contact maakt met het contact en op die manier de telefoon in zou kunnen schakelen.
-
-
-
Gebruik een spudger of een van je schone nagels om de kabelaansluiting van het OLED-paneel uit het contact op het logic board omhoog te duwen.
-
-
-
Verwijder de vijf 1 mm lange Y000-schroeven die de cover van de voorste sensormodule bevestigen.
what 3 are the small ones? I don't know anymore
in case anyone else reads this, the 3 small ones screw directly onto the board. the two longer ones screw into standoffs (the two top screws, based on the picture above)
Skyejobs -
-
-
-
Gebruik een spudger of een van je schone nagels om de kabelaansluiting van de voorste sensormodule los te koppelen.
-
-
-
Verwijder de 1.1 mm lange tri-point Y000-schroef.
-
Verwijder de 1.8 mm lange tri-point Y000-schroef.
-
Verwijder de twee 1.6 mm lange #00 kruiskopschroeven.
-
-
-
Gebruik een föhn of een warmtepistool, of verwarm een iOpener en leg deze gedurende 1-2 minuten op de bovenkant van het scherm. om de lijm onder de sensormodule te verzwakken.
-
-
-
Gebruik de punt van je spudger om de nabijheidssensor op voorzichtige wijze uit haar inkeping omhoog te wrikken.
-
-
-
Gebruik je spudger of een pincet om de infraroodschijnwerper uit de inkeping omhoog te wrikken.
-
-
-
Verwijder de oorstukspeaker en de voorste sensormodule.
-
Infraroodschijnwerper
-
Nabijheidssensor
-
Microfoon
-
Vergelijk het nieuwe met het originele onderdeel om te zien of je onderdelen van je oude naar je nieuwe onderdeel moet overzetten of dat je beschermfolie moet verwijderen voordat je bepaalde onderdelen kunt installeren.
Om je toestel weer in elkaar te zetten, volg je deze instructies in omgekeerde volgorde. Breng nieuwe kleefstrips aan waar nodig nadat je de voorheen gelijmde gebieden met wat isopropyl alcohol (>90%) hebt schoongemaakt.
Breng je e-afval naar een door R2 of e-Stewards gecertificeerde recycler.
Ging je reparatie niet zoals gepland? Check dan ons iPhone 12 mini-antwoordenforum voor hulp bij het oplossen van je probleem.
Vergelijk het nieuwe met het originele onderdeel om te zien of je onderdelen van je oude naar je nieuwe onderdeel moet overzetten of dat je beschermfolie moet verwijderen voordat je bepaalde onderdelen kunt installeren.
Om je toestel weer in elkaar te zetten, volg je deze instructies in omgekeerde volgorde. Breng nieuwe kleefstrips aan waar nodig nadat je de voorheen gelijmde gebieden met wat isopropyl alcohol (>90%) hebt schoongemaakt.
Breng je e-afval naar een door R2 of e-Stewards gecertificeerde recycler.
Ging je reparatie niet zoals gepland? Check dan ons iPhone 12 mini-antwoordenforum voor hulp bij het oplossen van je probleem.
Annuleren: ik heb deze handleiding niet afgemaakt.
51 andere personen hebben deze handleiding voltooid.
Met dank aan deze vertalers:
50%
Thomas Keulemans helpt ons de wereld te herstellen! Wil je bijdragen?
Begin met vertalen ›
13Gids Commentaar
The only way to pair the new sceen to the phone to retain Tue Tone is to buy a dedicated board that copy the data from the original screen to the new.
This guide was impeccable! The hardest part is definitely getting the screen glue off. Ended up separating the frame of the screen from the display itself. All worked out in the end though!
same! I was wondering why the inside of my phone looked different than the pictures before realizing the screen assembly has two layers and I accidentally removed only the top one instead of both.
Likewise, worked out for me anyhow.
macro -
The same thing happened to me. So a simple battery replacement turned into a display replacement :D
Should the phone turn ON and screen work with out speaker/sensor module?
Yes it will!
I wish they would include the way to put the water resistant gasket on, not all of us know what to do.
one of the steps above (in reverse order) links to a different guide for replacing the water resistant gasket
macro -
So I have an iPhone 12, just the basic model. When I removed the screen assemble, the camera/speaker/mic setup was not attached to the old screen. I thought maybe I broke a cable, but there doesn't appear to be any screw points for the camera assemble on the old screen. Also, the upper cable when you hinge the old screen open isn't attached to the screen. Finally, there do not appear to be any clips on the old screen, and the replacement screen does have clips, but they do not appear to go into anything in the iPhone 12 body. The replacement screen also has screw points for the camera assemble to attach to. Do I not have an iPhone 12?
This is the iPhone 12 MINI guide iPhone 12 Vervanging van het scherm this is the iphone 12 guide
Do not open it like a book at STEP 16.
There is a small metal piece on the left side of the screen that extends deep into the iPhone’s frame. If you open it like a book, you risk bending it and damaging your screen.
Instead, carefully lift the entire screen by just 1 or 2 millimeters before opening it with great caution.
I removed the cracked screen of an iPhone 12 mini (A2176, MG6L3LL/A) with the intention of replacing it with the OLED replacement I got from ifixit. To my surprise, the original screen differs from the guide's photos in the following ways.
Original screen has ...
- NO tabs on the screen, and no slots in body to receive any.
- front sensor and speaker assembly are NOT attached to screen, rather part of the board.
- geometry of the earpiece speaker slot appears off, it is wider in the original than the replacement.
Does anyone know what's going on? Have screens changed within same model A2176.
Just for clarity, the photos of this guide and in line with the replacement screen, the original screen just doesn't match them and I see no way of "making it work". The overall screen dimensions are correct and the screen works when powering up the opened phone, that's about it.
Any help greatly appreciated.
is it oem apple battery, because at some photo shows(Ifixit) and another shows (apple) ... wait your answer?
karim - Antwoord
BEWARE! This screen isn’t the same as older iPhone models’ screens. The iPhone mini 12-screen comes with a thin plastic frame around the screen on its back. Thus, make sure you don’t insert the pick in between the screen and its plastic frame, as you’ll seperate the screen and leave the plastic frame still sitting in the phone’s metal housing (this cost me 100 dollars…). Carefully heat the sides of the metal housing and do not heat directly on the glass, as doing so will potentially loosen the glue from the plastic frame stuck to the screen. My suggestion is that you watch a video of this repair as this step-by-step-guide is undercooked.
Dan - Antwoord
This is an excellent comment. Following this step-by-step guide to the letter will break your screen; it's by far the worst iFixit guide I've seen to date.
Dormouse -
Yup, that’s what happened to me. I will be reading the comments next time
pinballnc -
Ive finished mine and Soooo absolutely dont do this yourself🙌🏽 unless your a mechanic because first of all they didnt send me all of the right tools🤗 and secondly the battery they gave me has an overly large component so it wont fit into my phone. And the absolute HASSEL i had to go through to even just get the package was insane it was a whole month of struggling just for the stuff to not even be right, in conclusion will NEVER order from here again..🤗
Chanell - Antwoord